Legacy Tests Failed - What does this mean? (Log included)

[anywheretom]

Any help would be greatly appreciated.

Testing Started    04/23/2011 01:42:03

System Timer............................PASSED 
BIOS Timer..............................PASSED 
IRQ Controller..........................PASSED 
DMA Channels............................PASSED 
RAM Refresh.............................PASSED 
RTC Clock...............................PASSED 
CMOS RAM................................PASSED 
Keyboard................................PASSED 
PCI.....................................PASSED 
PCMCIA..................................N/A     
USB Port................................PASSED 
USB Port External Loop..................
  Cntlr/Port 0/0  0/1  1/0  1/1  2/0  2/1  3/0  3/1  4/0  4/1
  Type: UHCI HIGH ---- ---- ---- ---- ---- FULL LOW- ---- ----
  Testing for attached devices only
  Only 3 ports detected
USB Port External Loop..................FAILED  04/23/2011 01:42
IEEE1394 Controller.....................PASSED 

Testing Completed  04/23/2011 01:42:37

Testing Started    04/23/2011 01:43:11

SoundBlaster............................
  Sound card is not installed
SoundBlaster............................N/A     
DIMM/RIMM EEPROM ID.....................
  WARNING:
    DIMM 0 EEPROM area is writable!
  WARNING:
    DIMM 2 EEPROM area is writable!
DIMM/RIMM EEPROM ID.....................PASSED 
SMBUS...................................PASSED 
Modem...................................
  No modem was detected.
Modem...................................N/A     

Testing Completed  04/23/2011 01:43:50

Testing Started    04/23/2011 01:44:50

SoundBlaster............................
  Sound card is not installed
SoundBlaster............................N/A     
DIMM/RIMM EEPROM ID.....................
  WARNING:
    DIMM 0 EEPROM area is writable!
  WARNING:
    DIMM 2 EEPROM area is writable!
DIMM/RIMM EEPROM ID.....................PASSED 
SMBUS...................................PASSED 
Modem...................................
  No modem was detected.
Modem...................................N/A     

Testing Completed  04/23/2011 01:45:29

HDD-0: WDC WD1600JS-75NCB3 / 10.02E04 / WD-WCANMC355907
ODD-0: JLMS DVD-ROM XJ-HD166 / DD05
ODD-1: SAMSUNG CD-R/RW SW-252S / R902

ODD-1: DMA rate not set by the system BIOS.

Testing Started    05/06/2011 03:47:43

CPU 1 CPU Registers.....................PASSED 
CPU 1 CPU Arithmetics...................PASSED 
CPU 1 CPU Logical Operations............PASSED 
CPU 1 CPU String Operations.............PASSED 
CPU 1 CPU Misc Operations...............PASSED 
CPU 1 CPU Interrupts/Exceptions.........PASSED 
CPU 1 CPU Buffers/Cache.................PASSED 
CPU 1 CoProc Registers..................PASSED 
CPU 1 CoProc Commands...................PASSED 
CPU 1 CoProc Arithmetics................PASSED 
CPU 1 CoProc Transcendental.............PASSED 
CPU 1 CoProc Exceptions.................PASSED 
CPU 1 MMX Test..........................PASSED 

Testing Completed  05/06/2011 03:47:51

Testing Started    05/06/2011 03:47:57

CPU 1 CPU Registers.....................PASSED 
CPU 1 CPU Arithmetics...................PASSED 
CPU 1 CPU Logical Operations............PASSED 
CPU 1 CPU String Operations.............PASSED 
CPU 1 CPU Misc Operations...............PASSED 
CPU 1 CPU Interrupts/Exceptions.........PASSED 
CPU 1 CPU Buffers/Cache.................PASSED 
CPU 1 CoProc Registers..................PASSED 
CPU 1 CoProc Commands...................PASSED 
CPU 1 CoProc Arithmetics................PASSED 
CPU 1 CoProc Transcendental.............PASSED 
CPU 1 CoProc Exceptions.................PASSED 
CPU 1 MMX Test..........................PASSED 

Testing Completed  05/06/2011 03:48:05

Testing Started    05/06/2011 03:48:38

CPU 1 CPU Registers.....................PASSED 
CPU 1 CPU Arithmetics...................PASSED 
CPU 1 CPU Logical Operations............PASSED 
CPU 1 CPU String Operations.............PASSED 
CPU 1 CPU Misc Operations...............PASSED 
CPU 1 CPU Interrupts/Exceptions.........PASSED 
CPU 1 CPU Buffers/Cache.................PASSED 
CPU 1 CoProc Registers..................PASSED 
CPU 1 CoProc Commands...................PASSED 
CPU 1 CoProc Arithmetics................PASSED 
CPU 1 CoProc Transcendental.............PASSED 
CPU 1 CoProc Exceptions.................PASSED 
CPU 1 MMX Test..........................PASSED 
Base Fast Pattern.......................PASSED 
Base Fast Address.......................PASSED 
Base Bus Throughput.....................PASSED 
Legacy Fast Pattern.....................
  Failed address=1B6FCF60  Read data=2F0F0F0F  Expected=0F0F0F0F
Legacy Fast Pattern.....................FAILED  05/06/2011 03:48
Legacy Fast Address.....................
  Failed address=1B6D5688  Read data=5B6D5688  Expected=1B6D5688
Legacy Fast Address.....................FAILED  05/06/2011 03:48
Legacy Code Test........................
  Error at memory block 1B200000H
    Code verify failed
  Error at memory block 1B600000H
    Code verify failed
Legacy Code Test........................FAILED  05/06/2011 03:51
Legacy Advanced Pattern.................
  Failed address=1B6D78A0  Read data=FCFEFEFE  Expected=FEFEFEFE
Legacy Advanced Pattern.................FAILED  05/06/2011 03:53
System Timer............................PASSED 
BIOS Timer..............................PASSED 
IRQ Controller..........................PASSED 
DMA Channels............................PASSED 
RAM Refresh.............................PASSED 
RTC Clock...............................PASSED 
CMOS RAM................................PASSED 
Keyboard................................PASSED 
PCI.....................................PASSED 
PCMCIA..................................N/A     
USB Port................................PASSED 
USB Port External Loop..................
  Cntlr/Port 0/0  0/1  1/0  1/1  2/0  2/1  3/0  3/1
  Type: UHCI ---- ---- LOW- ---- ---- ---- ---- FULL
  Testing for attached devices only
  Only 2 ports detected
USB Port External Loop..................FAILED  05/06/2011 03:54
IEEE1394 Controller.....................
  IEEE 1394 Not Detected. Test Not Run.
IEEE1394 Controller.....................N/A     
Video Memory............................PASSED 
Video Pages.............................PASSED 
VGA Controller Registers................PASSED 
VGA Color-DAC Registers.................PASSED 
AGP.....................................
  No AGP video card detected
AGP.....................................N/A     
PCI Express.............................
  No PCI Express video card detected
PCI Express.............................N/A     
COM 1 Registers And Interrupts..........PASSED 
COM 1 Internal Loopback.................PASSED 
COM 1 External Loopback.................
  RTS-->CTS DTR-->DSR Delta-CTS Delta-DSR Failed
  Incorrect character count at 19200 BPS (0 vs 96)
  Incorrect character count at 38400 BPS (0 vs 96)
  Incorrect character count at 57600 BPS (0 vs 96)
  Incorrect character count at 115200 BPS (0 vs 96)
COM 1 External Loopback.................FAILED  05/06/2011 03:56
COM 1 FIFO Buffers (16550A).............PASSED 
LPT 1 Command And Data Port.............PASSED 
LPT 1 External Loopback And IRQ.........
  DATA0-->ERROR Failed
  STROBE-->SLCT Failed
  AUTOFD-->PE Failed
  INIT-->ACK Failed
  SLCTIN-->BUSY Failed
LPT 1 External Loopback And IRQ.........FAILED  05/06/2011 03:56
HDD-0 Controller........................PASSED 
HDD-0 Hi-Low Seek.......................PASSED 
HDD-0 Funnel Seek.......................PASSED 
HDD-0 Track To Track Seek...............PASSED 
HDD-0 Random Seek.......................PASSED 
HDD-0 Linear Verify.....................
  Aborted at sector 252013824
HDD-0 Linear Verify.....................ABORTED

Testing was aborted.

Testing Completed  05/06/2011 04:37:21

Testing Started    05/06/2011 04:38:33

[fwilson]

anywheretom,

The legacy tests refer to memory tests that have been replaced by the protected mode memory tests.  The log you attached indicates memory errors.

What version of PC-Doctor are you using and what is the make and model of your system?

-Fred