Legacy Tests Failed - What does this mean? (Log included)

Any help would be greatly appreciated.

Testing Started 04/23/2011 01:42:03

System Timer............................PASSED
BIOS Timer..............................PASSED
IRQ Controller..........................PASSED
DMA Channels............................PASSED
RAM Refresh.............................PASSED
RTC Clock...............................PASSED
CMOS RAM................................PASSED
Keyboard................................PASSED
PCI.....................................PASSED
PCMCIA..................................N/A
USB Port................................PASSED
USB Port External Loop..................
Cntlr/Port 0/0 0/1 1/0 1/1 2/0 2/1 3/0 3/1 4/0 4/1
Type: UHCI HIGH ---- ---- ---- ---- ---- FULL LOW- ---- ----
Testing for attached devices only
Only 3 ports detected
USB Port External Loop..................FAILED 04/23/2011 01:42
IEEE1394 Controller.....................PASSED

Testing Completed 04/23/2011 01:42:37

Testing Started 04/23/2011 01:43:11

SoundBlaster............................
Sound card is not installed
SoundBlaster............................N/A
DIMM/RIMM EEPROM ID.....................
WARNING:
DIMM 0 EEPROM area is writable!
WARNING:
DIMM 2 EEPROM area is writable!
DIMM/RIMM EEPROM ID.....................PASSED
SMBUS...................................PASSED
Modem...................................
No modem was detected.
Modem...................................N/A

Testing Completed 04/23/2011 01:43:50

Testing Started 04/23/2011 01:44:50

SoundBlaster............................
Sound card is not installed
SoundBlaster............................N/A
DIMM/RIMM EEPROM ID.....................
WARNING:
DIMM 0 EEPROM area is writable!
WARNING:
DIMM 2 EEPROM area is writable!
DIMM/RIMM EEPROM ID.....................PASSED
SMBUS...................................PASSED
Modem...................................
No modem was detected.
Modem...................................N/A

Testing Completed 04/23/2011 01:45:29

HDD-0: WDC WD1600JS-75NCB3 / 10.02E04 / WD-WCANMC355907
ODD-0: JLMS DVD-ROM XJ-HD166 / DD05
ODD-1: SAMSUNG CD-R/RW SW-252S / R902

ODD-1: DMA rate not set by the system BIOS.

Testing Started 05/06/2011 03:47:43

CPU 1 CPU Registers.....................PASSED
CPU 1 CPU Arithmetics...................PASSED
CPU 1 CPU Logical Operations............PASSED
CPU 1 CPU String Operations.............PASSED
CPU 1 CPU Misc Operations...............PASSED
CPU 1 CPU Interrupts/Exceptions.........PASSED
CPU 1 CPU Buffers/Cache.................PASSED
CPU 1 CoProc Registers..................PASSED
CPU 1 CoProc Commands...................PASSED
CPU 1 CoProc Arithmetics................PASSED
CPU 1 CoProc Transcendental.............PASSED
CPU 1 CoProc Exceptions.................PASSED
CPU 1 MMX Test..........................PASSED

Testing Completed 05/06/2011 03:47:51

Testing Started 05/06/2011 03:47:57

CPU 1 CPU Registers.....................PASSED
CPU 1 CPU Arithmetics...................PASSED
CPU 1 CPU Logical Operations............PASSED
CPU 1 CPU String Operations.............PASSED
CPU 1 CPU Misc Operations...............PASSED
CPU 1 CPU Interrupts/Exceptions.........PASSED
CPU 1 CPU Buffers/Cache.................PASSED
CPU 1 CoProc Registers..................PASSED
CPU 1 CoProc Commands...................PASSED
CPU 1 CoProc Arithmetics................PASSED
CPU 1 CoProc Transcendental.............PASSED
CPU 1 CoProc Exceptions.................PASSED
CPU 1 MMX Test..........................PASSED

Testing Completed 05/06/2011 03:48:05

Testing Started 05/06/2011 03:48:38

CPU 1 CPU Registers.....................PASSED
CPU 1 CPU Arithmetics...................PASSED
CPU 1 CPU Logical Operations............PASSED
CPU 1 CPU String Operations.............PASSED
CPU 1 CPU Misc Operations...............PASSED
CPU 1 CPU Interrupts/Exceptions.........PASSED
CPU 1 CPU Buffers/Cache.................PASSED
CPU 1 CoProc Registers..................PASSED
CPU 1 CoProc Commands...................PASSED
CPU 1 CoProc Arithmetics................PASSED
CPU 1 CoProc Transcendental.............PASSED
CPU 1 CoProc Exceptions.................PASSED
CPU 1 MMX Test..........................PASSED
Base Fast Pattern.......................PASSED
Base Fast Address.......................PASSED
Base Bus Throughput.....................PASSED
Legacy Fast Pattern.....................
Failed address=1B6FCF60 Read data=2F0F0F0F Expected=0F0F0F0F
Legacy Fast Pattern.....................FAILED 05/06/2011 03:48
Legacy Fast Address.....................
Failed address=1B6D5688 Read data=5B6D5688 Expected=1B6D5688
Legacy Fast Address.....................FAILED 05/06/2011 03:48
Legacy Code Test........................
Error at memory block 1B200000H
Code verify failed
Error at memory block 1B600000H
Code verify failed
Legacy Code Test........................FAILED 05/06/2011 03:51
Legacy Advanced Pattern.................
Failed address=1B6D78A0 Read data=FCFEFEFE Expected=FEFEFEFE
Legacy Advanced Pattern.................FAILED 05/06/2011 03:53
System Timer............................PASSED
BIOS Timer..............................PASSED
IRQ Controller..........................PASSED
DMA Channels............................PASSED
RAM Refresh.............................PASSED
RTC Clock...............................PASSED
CMOS RAM................................PASSED
Keyboard................................PASSED
PCI.....................................PASSED
PCMCIA..................................N/A
USB Port................................PASSED
USB Port External Loop..................
Cntlr/Port 0/0 0/1 1/0 1/1 2/0 2/1 3/0 3/1
Type: UHCI ---- ---- LOW- ---- ---- ---- ---- FULL
Testing for attached devices only
Only 2 ports detected
USB Port External Loop..................FAILED 05/06/2011 03:54
IEEE1394 Controller.....................
IEEE 1394 Not Detected. Test Not Run.
IEEE1394 Controller.....................N/A
Video Memory............................PASSED
Video Pages.............................PASSED
VGA Controller Registers................PASSED
VGA Color-DAC Registers.................PASSED
AGP.....................................
No AGP video card detected
AGP.....................................N/A
PCI Express.............................
No PCI Express video card detected
PCI Express.............................N/A
COM 1 Registers And Interrupts..........PASSED
COM 1 Internal Loopback.................PASSED
COM 1 External Loopback.................
RTS-->CTS DTR-->DSR Delta-CTS Delta-DSR Failed
Incorrect character count at 19200 BPS (0 vs 96)
Incorrect character count at 38400 BPS (0 vs 96)
Incorrect character count at 57600 BPS (0 vs 96)
Incorrect character count at 115200 BPS (0 vs 96)
COM 1 External Loopback.................FAILED 05/06/2011 03:56
COM 1 FIFO Buffers (16550A).............PASSED
LPT 1 Command And Data Port.............PASSED
LPT 1 External Loopback And IRQ.........
DATA0-->ERROR Failed
STROBE-->SLCT Failed
AUTOFD-->PE Failed
INIT-->ACK Failed
SLCTIN-->BUSY Failed
LPT 1 External Loopback And IRQ.........FAILED 05/06/2011 03:56
HDD-0 Controller........................PASSED
HDD-0 Hi-Low Seek.......................PASSED
HDD-0 Funnel Seek.......................PASSED
HDD-0 Track To Track Seek...............PASSED
HDD-0 Random Seek.......................PASSED
HDD-0 Linear Verify.....................
Aborted at sector 252013824
HDD-0 Linear Verify.....................ABORTED

Testing was aborted.

Testing Completed 05/06/2011 04:37:21

Testing Started 05/06/2011 04:38:33

	Author	Topic: Legacy Tests Failed - What does this mean? (Log included) (Read 908 times)
0 Members and 1 Guest are viewing this topic.