Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

 
Advanced search

2077 Posts in 556 Topics- by 1237 Members - Latest Member: T Hansen

May 22, 2012, 07:13:44 AM
Dr. Blip's PC-Doctor® ForumDr. Blip's ForumAsk Our Experts (Moderators: Chris Hill, James_PCD, SMart)Heat Issue
Pages: [1]
Print
Author Topic: Heat Issue  (Read 550 times) Bookmark and Share
0 Members and 1 Guest are viewing this topic.
thompsonm20
Newbie
*
Offline Offline

Posts: 1


View Profile
« on: February 09, 2010, 04:28:13 PM »

I was working on an HP laptop 64bit that had excessive amount of dust preventing cooling and the system was running very slow and hot. I cleared the dust and it is running cooler now, however it is still slow. PC doctor will not even boot from DOS and when I run it from windows it is reporting no problems.  I suspect the main board is damaged and was wondering if my assumption is correct. 


Thanks Very Much,

Merlin
Logged
fwilson
Hero Member
*****
Offline Offline

Posts: 784



View Profile
« Reply #1 on: February 10, 2010, 08:56:59 AM »

thompsonm20,

This is certainly possible but there may still be hope.

Sometimes when systems overheat for a period of time the thermal compound cooks and looses it's ability to do it's job.  It actually becomes like an insulator.

Before you give up try removing the heatsink, scraping off all of the old compound with a razor blade, cleaning with alcohol then reapplying the thermal compound to the CPU/Heatsink mating surface.

This has brought new life to systems for me and is worth a shot.  Good luck.

-Fred
Logged

“Integrity is doing the right thing, even if nobody is watching.”  ~ J.C. Watts
Pages: [1]
Print
Jump to:  

© 2012 PC-Doctor, Inc. ALL RIGHTS RESERVED.