Motherboard Recycle Presented II

[BleuOisou]

July 17 2019  18:34.hk w10p m800


Updated:

DUID modify Eth.mac is by RCF 3315  since 2012 tracking with Manufacture , and taught by Cisco for this protocal policy of IT , vista OS was modified , and multiple Ipv4, IPv6 networks playing very funny , such as no ipv6 gateway ping to , or ipv4 to ipv6 alternatively connectable …

This happening on the Windows 10 pro 1803 at Nov. 2018 as well, motherboard replaced unexpected again , Modify Dhcpipv6DUID from regedit well worked months to Feb. 2019 it won't be kept modifying after every reboot ?  Microsoft professional supporter would not get it further to contact the premium group which is having developer helpers in order to get more details to support.  Case sort of stopping to be going on !

                 Windows 10 pro latest having :
                              -    VGA often reminded to update for driver which installed many times afterward ?
                              -    Modified Parameter DUID initial.eth.mac OEM would not be remained after restart the computer ?

Sincerely Yours







From router vender, told me that Hardward replaced instance the motherboard, would not changed the DUID by a document of IATA .


Thus to the ipconfig / all cmd would auto present two MAC addresses respectively for IPv4 and IPv6 servers.


Since the SC 10.5 diagnose has not found any network errors , may here please to be stated that, this program DVD running on both interfaces of motherboard or one only then reported output to ?  (This computers with two mac shown is vista built-in one ether only )

The two mac having their own IPs because, one outside computer interface ether is using ISP IP , would any helpful programs can find where it is and remove it please?


Sincerely
Bleu Oisou

[PCD_James]

Hello,

From your post it sounds like you are having issues with having two network ports, and a conflict with assigned IP addresses. If you are looking to disable one, you can do this from the Windows control panel.

[BleuOisou]

There is no conflicts and vista computer showing dhcpv4 ip bios mac , and dhcpv6 DUID mac that IANA document of "none changeable when hardware replaced " resource from cisco. And ever in 2013, dos cmd had verified easily get the physical mac equal to DUID tail mac as exact, no pc vender, Microsoft agree it was wrong or correct and anyway, in that way , unable to verify as it again by 2015


Router two of these mac addresses forwarded to ISP by clone would help to discover the network devices better over the one to the wan1 only when experienced .

The concern pretty much right this time is the two interfaces , you call it network ports , for me the wan ports equally ? [control panel there is only one adaptor for vista actually ]

Would it expose the one network opening on for any who can access it from the modem or wan1 perhaps , or else ip mac like broadcast ff::ff or multiple_cast static via router or somewhere ether of none physical operating mac by the vista ? , because by myself there is no cable connecting on the wan2 but wan1 just?

[PCD_James]

It sounds like you are having some technical issues with your networking set up that are outside of the scope of my support.

Unfortunately I am only able to support PC-Doctor products. I would direct you to your hardware manufacturer for support for this issue.

Hope you get it all taken care of!

[BleuOisou]

Am trying to find out , would the SC 10.5 why not be able to report the error that network is having via router , with both dhcp server , and one of mac addresses Ethernet is linked to remained IANA static and running an IP ? 

The intruder wireless router mac_gateway_IP.isp would have had been detected nothing  error-less in the network feature part ?  Is this none SC10.5 Function covered ?





Please let this be sure.


The NIC and IANA apparently merely recording the DUID of an organization such as ISP , but overlook the client with own router when have had being merged into mac of ISP.modem ?!

[BleuOisou]

No, the Service Center 10.5 won't report the network for the modem connections only time, or router earlier time some error for the intruder, ether splitted  or etc.  than over the previously... attentions paid.

[PCD_James]

Can you tell me which test is having unexpected results?

[BleuOisou]

The communication \ networking area, recalled ver. 6078_134_32/64 Oct 2013 and the before time of 2010 Self Test of PC-Doctor ToolBox, detectable and reporting the network status , although isp ignored it .


For the updated PC-Doctor ToolBox  v.7.0.6852.45 yesterday, [vista pack II unable loaded and updated to new version? ]

meeting an updating of in the router had error "The system has not been updated by windows update" well, windows 10 says latest updated,  when the modem connected got the update searched minutes finally error as of the above?

Could this is replaced displaying for real time networking performance ?

The NIC and IANA apparently merely recording the network's devices by the DUID of an organization such as ISP , but overlooking a client with own router when have had being merged into mac address of ISP presented modem, that make the intruder through dhcpv4 and dhcpv6 running on two mac addresses which one of is mac(s) just a memory of the root server , none physical mac working on the computer with networking  ?!



Please look at the screenshots.

[BleuOisou]

PCI installing unable get driver for ?

[PCD_James]

No unfortunately Service Center is not designed for Networking Diagnostics, only hardware diagnostics. It will test hardware functionality of a network port using a loopback adapter but that is about the limit of it.

As far as your driver failing to install, I would visit the website of the manufacturer for that piece of hardware and check for an updated version of the driver.

[BleuOisou]

Thank you very much let clearly aware of these  more , doctor .



The NIC and IANA apparently merely recording the network's devices by the DUID of an organization such as ISP , but overlooking a client with own router when have had being merged into mac address of ISP presented modem, that make the intruder through dhcpv4 and dhcpv6 running on two mac addresses which one of is mac(s) just a memory of the root server , none physical mac working on the computer with networking  ?!




Feature UPDATE like the screenshot , either saying Windows Updated to on Sept. 30 2016 by PC-Doctor Toolbox [ Oct. 21 2016 07:24.hk w7uw10p 042 alright check] , or windows 10 told it is updated to the latest as the time stamp captured,  via reminded of Tool Box new version 7.0.6852.45 for  2 days , the UPDATE altering error or Yet Update , never been passed through ?


Would this be another way telling the network problematic existing or something else ?









The Vista Pack II unable or invalid for this PC-Toolbox updated to v. 7.0.6852.45?




Please kindly be informed  , Service Center Pack  driver update hyperlink would wherein be accessed from by http://www.pc-doctor.com ?

[BleuOisou]

Vista pack II updated Ver. for toolbox successfully , ran it left of : 

   

         - Toolbox UPDATE 30 min no responded well , why the new Toolbox reporting
           final update is 73 days before , 2 weeks before remember updated windows?
           java updated to 8 today as well ...

         - PCI searching the driver on line taken 20 min no responded ?

[PCD_James]

It looks like you have an issue with Windows that is not allowing you to check for updates. Unfortunately I am not able to provide support for Windows. Please visit https://support.microsoft.com for support for Microsoft products.

[BleuOisou]

Are you positive this is nothing for Toolbox but vista operation system ? How is the windows 10 pro here also ?  => next  That have to tell you Another windows 10 pro upgraded to from win 7, it working all look well for every feature for the toolbox new version ?


PCI driver shown installed , and msg : waiting for user open... , follow the restart operation system, the OS re-searching the driver again ?

Okay , waiting patch issued to this new PC-Doctor ToolBox

[BleuOisou]

IS THIS MICROSOFT : ?

Vista specially conserved mac and ip addresses for vista only as SFC NIC or IANA , they are how to be managed for the storage and applicant, principle is UNABLE modified the DUID detected mac with dhcpv6 WHEN the hardware changed , such as motherboard here ?

The vista ipconfig as having dhcpv4 and dhcpv6 both servers fetching IPs and on.from different interface mac of motherboard, looks just as the IPv6_DUID synchronized with IANA the root record when am using physical mac with me is not being at the root of the association ?



To get this "correct" , modified the DUID mac same with IPv4 physical running mac, well this makes the Microsoft \ Access \ Network displaying two computers icon less over four totally ?  That naturally implying the mac of IPv6 , a replaced ether mac , has being connected with a network and recognized two mac addresses , meanwhile two else computers having been recognized on the IPv4 with another network ?

In this case, shall not modify both mac address either physical running or IANA remembered mac and having both them via this vista ?  In that situation , would have had gotten the speed lower as 20% bandwidth and a lots of error improper networking... ?



Vista :// -> windows [Oct. 26 2016 10:01.hk w8pw10p 042]



SC10.5 reported TCP/IP report msg: "No internet, contact ISP , blocked firewall" that router having blocked as many none related IPs 192.168.b1 (b2, b3, b4).xx nothing beyond ?
[screenshot unable to be posted Oct. 27 2016  21:41.hk w7uw10p 042]


By PC-Doctor 10.5 srv ctr. detected , LCMP blocked the personal router@cisco Internet. Getting Intranet .

Modem.isp years' would not manually updated the routerring service unless using isp service of routerring [when ISP won't allow client to do any vpn , firewall settings] and no second mac.modem offered for the personal-router conflicting the mac address at wan port? This sounds there are nowhere can be put this case to be traced.